Compare useful vacuum pumping throughput with compressed-air input.
These optional products are directly related to the pneumatic task you are calculating.
If you buy through these links, PneumaForge may receive a commission at no extra cost to you.As an Amazon Associate, PneumaForge earns from qualifying purchases.
Use the Vacuum Generator Efficiency Calculator to compare useful vacuum pumping throughput with compressed-air input. The calculator uses Suction flow, Compressed-air consumption, Optional useful vacuum power and Optional compressed-air equivalent power and reports flow ratio / energy efficiency indicators.
Read the result in the context of the selected units and pressure basis. For this tool, the primary outputs are flow ratio / energy efficiency indicators. Change one input at a time when comparing scenarios so the effect of each variable remains clear.
PneumaForge applies this verified method: Report explicitly defined ratios only: suction-flow / compressed-air-consumption and optionally useful pneumatic/vacuum work divided by supplied compressed-air energy when all states are provided. The functional engine is shared with related tools in the vacuum-economics family, while this page solves the specific intent represented by vacuum ejector efficiency calculator.
Report explicitly defined ratios only: suction-flow / compressed-air-consumption and optionally useful pneumatic/vacuum work divided by supplied compressed-air energy when all states are provided.Reproducible example: start with the calculator's default values (Suction flow = 300; Compressed-air consumption = 300; Optional useful vacuum power = 0; Optional compressed-air equivalent power = 0) and calculate the result. Then change the variable most relevant to your application and compare the new flow ratio / energy efficiency indicators against the baseline.
Do not label a simple flow ratio as universal thermodynamic efficiency.
It is designed to compare useful vacuum pumping throughput with compressed-air input. The reported outputs are flow ratio / energy efficiency indicators.
The calculator uses Suction flow, Compressed-air consumption, Optional useful vacuum power and Optional compressed-air equivalent power. Only use values that represent the same operating condition or design case.
The calculation follows: Report explicitly defined ratios only: suction-flow / compressed-air-consumption and optionally useful pneumatic/vacuum work divided by supplied compressed-air energy when all states are provided. The page also states the assumptions that define where the method is valid.
Do not label a simple flow ratio as universal thermodynamic efficiency.
Yes. PneumaForge converts supported units through canonical engineering units. For compressed-air reference flows and pressure bases, the reference pressure and temperature must also remain consistent.