Convert valve flow coefficients Cv and Kv.
These optional products are directly related to the pneumatic task you are calculating.
If you buy through these links, PneumaForge may receive a commission at no extra cost to you.As an Amazon Associate, PneumaForge earns from qualifying purchases.
Use the Cv to Kv Conversion Calculator to convert valve flow coefficients Cv and Kv. The calculator uses Flow coefficient and From and reports converted coefficient.
Read the result in the context of the selected units and pressure basis. For this tool, the primary outputs are converted coefficient. Change one input at a time when comparing scenarios so the effect of each variable remains clear.
PneumaForge applies this verified method: Standard coefficient conversion. The functional engine is shared with related tools in the flow-coefficient-conversion family, while this page solves the specific intent represented by Cv to Kv calculator.
Standard coefficient conversionReproducible example: start with the calculator's default values (Flow coefficient = 1; From = Cv) and calculate the result. Then change the variable most relevant to your application and compare the new converted coefficient against the baseline.
Cv↔Kv conversion is definition-based. C↔Cv is NOT treated as universal.
It is designed to convert valve flow coefficients Cv and Kv. The reported outputs are converted coefficient.
The calculator uses Flow coefficient and From. Only use values that represent the same operating condition or design case.
The calculation follows: Standard coefficient conversion. The page also states the assumptions that define where the method is valid.
Cv↔Kv conversion is definition-based. C↔Cv is NOT treated as universal.
Yes. PneumaForge converts supported units through canonical engineering units. For compressed-air reference flows and pressure bases, the reference pressure and temperature must also remain consistent.